|
1997-2004 Jeep Wrangler & 1997-2002 Jeep Cherokee 4.0L Inline six |
|
Trail Jammer Throttle Body Installation Instructions 1. With a standard screwdriver, loosen the clamp attaching the air intake tube to the throttle body. Remove the air intake tube from the JEEP throttle body. 2. Using a 10mm socket or wrench, remove the (4) bolts attaching the JEEP throttle body to the intake manifold, set aside. These bolts will be used to attach the Trail Jammer 62mm throttle body to the intake manifold. 3. Set aside the JEEP throttle body gasket (gasket between the throttle body and the intake manifold). 4. Disconnect the electrical connectors that attach to the IAC (idle air control) and TPS (throttle position) sensors
|
